Plot Map Design Software Free Download

Maps For Design Free

The information in this article applies to: QUESTION How do I create a plot plan using survey information? In this example we will use the following survey information: • Line 1 - 77.23 feet N3 18' 25' E • Line 2 - 65.81 feet N86 41' 1' E • Line 3 - 58.97 feet S7 5' 56' E • Line 4 - 57.7 feet S67 9' 50' W • Arc 1 Radius 27.99 feet This image shows what the completed plot plan will look like. We've added the distance and bearing information with text. ANSWER You can create a CAD polyline representation of your plot plan using the distance and bearing information from a survey, then edit the rectangular Terrain Perimeter line to fit it exactly. To enter plot line information • Select File>New Plan to open a new, blank plan. • Click the Select Objects button, and if a Terrain Perimeter is present in the plan, click on it and press the Delete edit button. • Select CAD>Draw Line from the menu, then begin by drawing CAD line # 1 from the bottom of the screen up.

• Select the line and click the Open Object edit button to display the Line Specification dialog. • Enter the Length information for line 1. • Press the TAB key to move to update the dialog and move to the Angle field.

When you press the TAB key, your Length information will convert to inches. • Enter the Angle information for this line. Bearing information can be entered in this format: N3 18 25 E • Click OK to close the dialog and apply your changes. • Repeat steps 3 and 4 to create lines 2, 3 and 4. To create a curved plot line with a specific radius • Select CAD>Draw Line, then click and drag to draw a CAD line from the end of line 4 to the beginning of line 1.

Free download plot map design downloads - Collection of download plot map design freeware, shareware download - Frozen Universe, 4 in 1 for Solitaire, 4 in 1 free for.

• Select this line and click the Change Line/Arc edit button. The arc should curve outward, similar to our sample image.

• With the arc selected, click the Open Object edit button. On the Selected Arc panel of the Polyline Specification dialog: • Specify the Radius of the arc. • Click OK to close the dialog and apply your change. If you have received plot plan information from a surveyor, keep in mind that any given line can be described in two ways using Quadrant Bearings, and not all surveyors will describe the lines of a given plot in the same direction (ie, clockwise or counterclockwise). If the lines are not described in the same direction, your result will not be a closed polyline. To view the plot perimeter in 3D Now we have our completed plot plan. Mmc Recovery Software Free Download Full Version. Since this is a CAD polyline, it can only be seen in floor plan view.

To create a three dimensional object that can be seen in 3D, you can create a Terrain Perimeter and edit its shape to match the CAD polyline. • Select Terrain>Create Terrain Perimeter from the menu to create a rectangular terrain. • Click the Select Objects button, then click on the terrain perimeter to select it and display its edit handles.

• Click and drag the center edit handle so that the Terrain Perimeter is approximately centered over your plot plan polyline. You do not need to be precise. • Click on the edit handle at the top left corner and drag it to the top left corner of your polyline, at the end of line 1. • Similarly, drag the top right edit handle to the end of line 2, the bottom right edit handle to the end of line 3, and the bottom left edit handle to the beginning of line 1.

• Click on the bottom line of the Terrain Perimeter and click the Break Line edit button. Click on the bottom line near the plot plan arc to create a new corner handle at the point where you clicked. • You can now click and drag this new diamond shaped edit handle to the end of line 4. • Select the new line segment that needs to become the arc and click click the Change Line/Arc edit button, as we did earlier to create the arc in the plot plan. • With the new curved segment selected, click Open Object edit button and on the Selected Arc panel of the Polyline Specification dialog: • Enter the same Radius value as you did for the plot plan polyline.

Now your plot plan and terrain should match. If you wish, you can use the Text tools to add length and bearing information in floor plan view.

The information in this article applies to: QUESTION How do I create a plot plan using survey information? In this example we will use the following survey information: • Line 1 - 77.23 feet N3 18' 25' E • Line 2 - 65.81 feet N86 41' 1' E • Line 3 - 58.97 feet S7 5' 56' E • Line 4 - 57.7 feet S67 9' 50' W • Arc 1 Radius 27.99 feet This image shows what the completed plot plan will look like. We've added the distance and bearing information with text. ANSWER You can create a CAD polyline representation of your plot plan using the distance and bearing information from a survey, then edit the rectangular Terrain Perimeter line to fit it exactly. To enter plot line information • Select File>New Plan to open a new, blank plan. • Click the Select Objects button, and if a Terrain Perimeter is present in the plan, click on it and press the Delete edit button. • Select CAD>Draw Line from the menu, then begin by drawing CAD line # 1 from the bottom of the screen up.

• Select the line and click the Open Object edit button to display the Line Specification dialog. • Enter the Length information for line 1. • Press the TAB key to move to update the dialog and move to the Angle field. When you press the TAB key, your Length information will convert to inches. • Enter the Angle information for this line.

Bearing information can be entered in this format: N3 18 25 E • Click OK to close the dialog and apply your changes. • Repeat steps 3 and 4 to create lines 2, 3 and 4.

To create a curved plot line with a specific radius • Select CAD>Draw Line, then click and drag to draw a CAD line from the end of line 4 to the beginning of line 1. • Select this line and click the Change Line/Arc edit button.

The arc should curve outward, similar to our sample image. • With the arc selected, click the Open Object edit button. On the Selected Arc panel of the Polyline Specification dialog: • Specify the Radius of the arc. • Click OK to close the dialog and apply your change. If you have received plot plan information from a surveyor, keep in mind that any given line can be described in two ways using Quadrant Bearings, and not all surveyors will describe the lines of a given plot in the same direction (ie, clockwise or counterclockwise).

If the lines are not described in the same direction, your result will not be a closed polyline. To view the plot perimeter in 3D Now we have our completed plot plan. Since this is a CAD polyline, it can only be seen in floor plan view. To create a three dimensional object that can be seen in 3D, you can create a Terrain Perimeter and edit its shape to match the CAD polyline. • Select Terrain>Create Terrain Perimeter from the menu to create a rectangular terrain.

• Click the Select Objects button, then click on the terrain perimeter to select it and display its edit handles. • Click and drag the center edit handle so that the Terrain Perimeter is approximately centered over your plot plan polyline. You do not need to be precise. • Click on the edit handle at the top left corner and drag it to the top left corner of your polyline, at the end of line 1. • Similarly, drag the top right edit handle to the end of line 2, the bottom right edit handle to the end of line 3, and the bottom left edit handle to the beginning of line 1. • Click on the bottom line of the Terrain Perimeter and click the Break Line edit button.

Click on the bottom line near the plot plan arc to create a new corner handle at the point where you clicked. • You can now click and drag this new diamond shaped edit handle to the end of line 4. • Select the new line segment that needs to become the arc and click click the Change Line/Arc edit button, as we did earlier to create the arc in the plot plan. • With the new curved segment selected, click Open Object edit button and on the Selected Arc panel of the Polyline Specification dialog: • Enter the same Radius value as you did for the plot plan polyline. Now your plot plan and terrain should match.

If you wish, you can use the Text tools to add length and bearing information in floor plan view.

This entry was posted on 11/19/2017.